R&S FSW Series - Page 480

Common Measurement Settings
R&S
®
FSW
480User Manual 1173.9411.02 ─ 43
8.6.1.2 Trigger Settings
Access: "Overview" > "Trigger/Gate"
External triggers from one of the TRIGGER INPUT / OUTPUT connectors on the
R&S FSW are configured in a separate tab of the dialog box.
See Chapter 8.2.7, "Trigger Input/Output Settings", on page 438
For step-by-step instructions on configuring triggered measurements, see Chap-
ter 8.6.1.4, "How to Configure a Triggered Measurement", on page 486.
Preview....................................................................................................................... 481
└ Frequency.....................................................................................................481
└ RBW..............................................................................................................481
└ Sweep Time.................................................................................................. 481
Trigger Source.............................................................................................................482
└ Free Run.......................................................................................................482
└ External Trigger 1/2/3................................................................................... 482
└ Video.............................................................................................................483
└ IF Power........................................................................................................483
└ Baseband Power...........................................................................................483
└ RF Power......................................................................................................483
Trigger and Gate Configuration