Network and Remote Operation
R&S
®
FSW
777User Manual 1173.9411.02 ─ 43
Before storing the file, you can display a "Preview" of the file in the selected format.
Currently, the following file formats are supported:
"C++"
A commonly used general programming language for various applica-
tions (*.cpp)
"MATLAB
(Instrument
Control Tool-
box)"
A programming environment, frequently used in signal processing
and test and measurement applications (*.m)
You can use this format directly with the MATLAB© Instrument Con-
trol Toolbox.
"MATLAB
(R&S Toolkit)"
You can use this format directly with the MATLAB© Toolkit.
"NICVI"
An ANSI C programming environment designed for measurements
and tests (*.cvi)
You can use this format directly with National Instruments LabWind-
ows CVI.
"Plain SCPI"
Represents SCPI base format, that is ASCII format, saved as a text
file (*.inp); contains no additional header data
Use this format to load a recorded script back to the editor later.
"Python"
A commonly used general programming language for various applica-
tions (.py)
Clear All
Removes all recorded commands from the current SCPI command list.
Automating Tasks with Remote Command Scripts
To Next Page
Loading...
