R&S FSW Series User Manual

Network and Remote Operation
R&S
®
FSW
810User Manual 1173.9411.02 ─ 43
Note: To avoid problems, use a fixed IP address.
When a DHCP server is used, a new IP address is assigned each time the instru-
ment is restarted. This address must first be determined on the instrument itself.
Thus, using a DHCP server is not suitable for remote operation of the R&S FSW
via Remote Desktop.
2.
Select the "Windows" icon in the toolbar to access the operating system.
3. In the Windows "Start" menu, select "Settings > System".
4. Search for "remote access".
5. Select "Allow remote access to your computer".
6. Define which users are to be given access to the R&S FSW via Remote Desktop.
Note: The user account under which configuration is carried out is automatically
enabled for Remote Desktop.
a) Select the "Select Users" button.
b) Select the users or create new user accounts as described in Chapter 13.6.3.1,
"How to Create Users", on page 805.
c) Select "OK" to confirm the settings.
7. The R&S FSW is now ready for connection setup with the Remote Desktop pro-
gram of the controller.
How to Set Up a Network and Remote Control

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English