Operation
R-Concept
122 / 476
6.3.3 Warning and status indications on the R-Touch
Red warning indicators, which lead to engine stop
Engine oil pressure is too low Hydraulic fluid too hot
Serious engine problems, immedi-
ately switch off engine
Lubrication pump distributor gear
failed
Coolant level too low Hydraulic oil level too low
Coolant temperature too high
1
2
(1) Time until the engine is automatically switched off
(2) Error description
In the case of some severe operational outages, the diesel engine switches itself off
after a certain time. An error message appears on the R-Touch. An entry is logged in
the fault memory at the same time. The engine can be restarted at the driver’s own
responsibility, e.g. to move off a railway crossing.
Red warning indicators
Security code active Engine oil level too low
Coolant temperature too high Pump distributor gear clutch pres-
sure too low
Stop! Insufficient supply pressure Battery voltage too low or too high
(under 24V or over 32V)
Automated engine STOP active Release pressure parking brake
too low
WARNING! Injury hazard STOP! Impending collision
Engine oil temperature too high Emergency stop switch pressed
Warning emergency steering
defect
Control Error memory engine
To Next Page
Loading...
