Safety
General symbols and instructions
24 / 476
CAUTION
This signal word warns you of a possibly dangerous situation which may lead to seri-
ous injury or to death and damage to the machine or other serious property dam-
age. Non-observance of these instructions may lead to loss of warranty. This hazard
may always occur if the operating or working instructions are not or only imprecisely
observed.
ATTENTION
This signal word warns you of a possible severe damage to the machine or other
severe property damage. Non-observance of these instructions may lead to loss of
warranty. This hazard may always occur if the operating or working instructions are
not or only imprecisely observed.
ADVICE
This symbol draws your attention to some special aspects. This helps to facilitate
work.
Item numbers
The item numbers used in drawings are put in text in parentheses (1) and marked in
bold.
Operational activities
The defined sequence of operational activities facilitates the correct and safe use of
the device.
2.3.1 Safety signs
The safety signs illustrate a danger source.
Warning of a general danger
This warning symbol stands for activities where several causes may lead to hazards.
Warning of dangerous electrical voltage
This warning symbol stands for activities during which the hazards of electrical shocks
with possible deadly consequences exist.
Warning against open running belt
This warning symbol stands for activities during which the hazards of open running belt
or chains with possible deadly consequences exist.
Warning against hot surfaces/hot liquids
This warning symbol stands for activities during which the hazards of hot surfaces/hot
liquids with possible deadly consequences exist.
To Next Page
Loading...
