Operation
Loading operation
228 / 476
6.13.9 Infeed conveyor (drive C in the drawing)
The infeed conveyor moves the beets from the pickup to the recleaner. This drive is
switched on or off using the button (10) on the right joystick.
1
10
The infeed conveyor (1) only runs when the recleaner is already running. If this drive is
stopped, all forward drives will also stop. This drive can not be reversed.
Rpm infeed conveyor
The speed of the infeed conveyor can be adjusted in ten
steps. Choose this function with R-Select.
+ key = infeed conveyor faster
- key = infeed conveyor slower
To Next Page
Loading...
