Malfunction and Remedies
Welding on the machine
421 / 476
8.7 Welding on the machine
When welding on the machine, always turn off the main battery switch. The ground
cable of the welding transformer must be connected as close as possible to the weld-
ing position.
ATTENTION
Danger of machine damage.
Welding on the machine may only be performed by people sufficiently qualified for the
respective work under the regional regulations. Welding on structural parts or parts
with a safety function may only be performed after enquiry with ROPA, to the extent
as it is admissible under the respective applicable regulations. All welding works may
only be performed as per applicable standards and the recognized rules of engineer-
ing. Always observe the increased fire hazard when welding near combustible parts
or liquids (fuel, oils, greases, tyres, etc.). We expressly point out that ROPA will not
assume any warranty for damage to the machine caused by improper welding.
To Next Page
Loading...
