Operation
Park heating (option)
287 / 476
6.22.1.3 Keys and controls
Immediate start key with status indicator.
Control knob (rotate and press) for selection and confirmation of the selected function.
Status indicator
The status of the heater is displayed by the coloured light of the immediate start key.
status Status indicator
heating mode GREEN continuous
heater off - control element activated WHITE continuous
fault - no heating RED flashing
heating mode preprogrammed - control element
in rest status*
GREEN flashing
* If there is no user input via the control element for a period of 60 seconds and the
heater is off, the control element is set to rest status (display and LED off).
6.22.2 Operation of park heating
6.22.2.1 Switch on heater with immediate start button
The "immediate start" function enables heating at the press of a button. The operating
time can be preset.
Immediate start button is programmed for heating
– Press immediate start button
– Heating is started
– Display shows the heat icon and the preset remaining
operating time.
– Immediate start key is green
To Next Page
Loading...