Operation
Driving
161 / 476
27
28
6
3
14
2
(27) Status indicator bar showing hand potentiometer setting (14)
(28) Status of traction drive (only during loading)
The speed set may be overridden up to maximum speed using the driving pedal. This
function enables quicker driving to the beet pile.
6.8.2.1 Automatic feed switch-on
Each time the ignition is switched on and each time the operating mode is changed
(Rabbit ↔ Turtle), the following selection field appears on the R-Touch after the
machine drive (yellow button (6)) switches on.
Amount season
Zeroing
Calibration
Switch on automatic activation of drive train?
Use the rotary wheel on the R-Direct to select either option "YES" or "NO".
Selecting "YES" activates the automatic system for the traction drive. Now press the
key (2) to switch on the feed. After switching off the machine drive, the display field
for traction drive status (28) flashes . This means that: after the next switch-on of
the machine drive, forward driving motion starts automatically (as soon as the pickup
rollers start to rotate). Pressing the key (2) is therefore no longer required. This func-
tion remains activated until the operating mode is switched again or until the ignition is
switched off. For safety reasons, pressing the key (3) also switches off the automatic
feed switch-on.
To Next Page
Loading...
