ROPA Maus 5 - Driving into the Beet Pile - Loading Mode START

Operation
Loading operation
235 / 476
6.13.14 Driving into the beet pile – Loading mode START
If a truck is not ready for loading under the truck conveyor, before switching on the
machine drive set the selection in the "LOAD MODE" row from "LOAD" (default set-
ting) to "START". This allows the machine to drive into the beet pile with the pickup
running without disturbing the remaining beet path. As soon as the machine drive is
switched off (yellow key (6) on the right joystick), the load mode is automatically reset
to "LOAD".
Special functions
Load mode
Drive train automatic
Central lubrication
Pile pickup up/down
Service fuel filter
Fast speed sieve conveyor
Start
Off
Auto
Maus5
Off
Off
1
(1) Indicator for activated START load mode