Operation
Driving
162 / 476
However, if you wish to reactivate the currently deactivated automatic feed switch-on,
then you can do so by selecting the "Drive train automatic" in the "Special functions”
menu.
Load mode
Drive train automatic
Central lubrication
Pile pickup up/down
Service fuel filter
Fast speed sieve conveyor
Special functions
On
Loading
Auto
Maus5
Off
Off
6.8.2.2 Driving backward in the operating mode "Turtle"
If reverse driving is activated via the key (3), then the icon appears on the terminal.
This key switches on the reverse drive direction of the traction drive for as long as the
key (3) is pressed. If the machine is driving forward during loading, then you can stop
this movement by pressing this key. While driving backward, speed control using the
hand potentiometer is not possible. The machine always drives backwards at the maxi-
mum possible speed.
In addition, the traction drive may be stopped as follows:
– Pressing the emergency stop switch
– Pressing the footswitch for driving direction
– Engaging the parking brake
To Next Page
Loading...
