Operation
Steering
174 / 476
6.11.1.4 Quick description: steering in "Rabbit" operating mode
Start engine.
↓
Select "Rabbit" operating mode.
↓
L R
Drive slowly (below 12 km/h).
↓
Unlock the main steering switch.
↓ ↓
Rear wheels may be steered to the
left (L) or right (R) using the joystick.
↓
Drive at least 0.5 km/h.
↓
Press multifunctional key (11).
Activate all-wheel steering. For
this purpose, press and hold
keys (12) and (13) simultane-
ously while driving until all-wheel
steering appears in the "Steer-
ing" display field on the R-Touch.
↓
The rear wheels are set straight
and remain in this position.
↓
↓
Important: lock main steering switch. If the rear wheels are not
in 0° position or the main steering switch is not locked, then cor-
responding warning messages are displayed on the R-Touch:
or