Operation
Loading operation
229 / 476
6.13.9.1 Infeed conveyor fast motion
Sometimes, a larger quantity of dirt sticks mainly in the section of the infeed and the
deflection rollers of the infeed conveyor. This usually happens when loading under
very unfavorable conditions. To be able to fling this soil off the conveyor, the infeed
conveyor is equipped with a quick motion switch.
6
You can switch on quick motion using the toggle switch (6). For this purpose, move
this switch to the left and hold it for so long, until soiling is removed. The infeed con-
veyor then runs at double speed.
Only switch on quick motion when the infeed conveyor is empty and no beets are on
the infeed conveyor anymore.
Briefly switch on quick motion if a "roll" made of soil and other contamination develops
in the section behind the deflecting roller. Quick motion removes this roll of dirt as long
as it does not exceed a specific size. Otherwise, the dirt must be manually removed.
If the recleaner is blocked, then the infeed conveyor automatically shuts off. As soon
as a blockage of the recleaner has been removed, then the infeed conveyor can be
started again by briefly pressing on the button (10) on the right joystick.
To Next Page
Loading...
