Lists/Tables/Plans/Diagrams/Maintenance Verification
Maintenance table
438 / 476
9.2 Maintenance table
Maintenance interval
Maintenance work
before har-
vest
start
daily
after the
first 50
oper. hrs.
every 50
oper. hrs.
after the
first 500
oper. hrs.
every 500
oper. hrs.
when
needed
annu-
ally
Diesel engine OM 936 see also operating manual Mercedes-Benz
Check oil level X
Change engine oil and oil filter X X X X
Check valve clearance, if needed, adjust X
thereafter every
1500 op. hrs.
Change coolant
every 3 years
Renew silicate cartridge every 3 years
Check coolant level, if needed, fill up X X X X X
Clean radiator fins X
Replacing fuel prefilter insert
Draining water from the water collecting
vessel
X X
Replacing fuel fine filter and prefilter at
the engine
Draining water from the water collecting
vessel
X X X
Replace air filter main element X X
Replace air filter safety cartridge Every 2 years or after 5 main element maintenance works
Leak and condition test of all pipes and
hoses
X X X
Check V-ribbed belt for condition X X X
Exchange V-ribbed belt see Mercedes-Benz engine maintenance instructions
AdBlue
®
filter cartridge exchange During every 2nd engine oil change
Pump distributor gears
Check oil level X X
Change oil X X X
Exchange intake and pressure filter X X X
4-gear manual transmission
Check oil level X X
Change oil X X X
To Next Page
Loading...
