Operation
Loading operation
239 / 476
6.13.18 END load mode
To save fuel it makes sense to reduce the speeds in the complete beet path at the end
of the pile, because at that stage the pile pickup will only be delivering small quantities
of beets to the pickup. The weighing result is also more accurate if the truck conveyor
reaches a specific minimum fill level. Go to the "Special functions" menu, then to the
"LOAD MODE" row and switch from "LOAD" (default setting) to "END". This selection
set the speeds of all drives to the values previously set last time the "END" mode was
used.
To return to the default setting, go to the "Special functions" menu, then the "LOAD
MODE" row and switch from "END" to "LOAD".
Special functions
Load mode
Drive train automatic
Central lubrication
Pile pickup up/down
Service fuel filter
Fast speed sieve conveyor
end
Off
Auto
Maus5
Off
Off
1
(1) Indicator for activated END load mode
To Next Page
Loading...
