Operation
Scales (option)
266 / 476
6.15.2.8 Continuing operation of scales
Follow the directions in page 257.
Perform zeroing at regular intervals.
Check the accuracy of the scales regularly. Compare the weight of a load displayed
by the scales with the weight recorded externally on the calibrated scale of the con-
signee. The scales should be calibrated immediately if large deviations are found.
Always keep the rollers in the weighing cells free from soil.
ADVICE
The weighing accuracy depends on the attention of the user. Regular zeroing, care-
ful calibration and as little soil accumulation on the conveyor will ensure continuing
weighing accuracy.
To Next Page
Loading...
