Maintenance and Service
Axles
345 / 476
7.6.2 Differential gears on front and rear axle
The first oil change is required after 50 operating hours, further oil changes must be
performed annually.
1
2
Front axle
(1) Oil drain screw
(2) Oil filling opening and oil level control screw
2
1
Rear axle
DANGER
Injury hazard!
Hazard to life due to moving machine parts.
– Before oil change, each time stop the machine and switch off the engine.
– The machine must be secured against inadvertent starting of the engine.
– All maintenance and repair work may only be performed by trained personnel.
To Next Page
Loading...
