ROPA Maus 5 - Removing and Installing Feed Rollers and Pinch Rollers

Maintenance and Service
Pickup
355 / 476
7.8.4.3 Removing and installing feed rollers and pinch rollers
Please note the following basic information:
Drive side:
13
12
14
15
11
85 Nm
– The rollers are driven by the coupling lugs (11) on the gearboxes. They are the only
means of holding the rollers to the gearboxes.
– All polyamide couplings (12) must be greased before they are pushed onto the
coupling lugs.
– Before assembly, one new O-ring (ROPA item no. 412338) (13) must be inserted
into the coupling lug and one O-ring (O-Ring ROPA item no. 412635) (14) into the
end of the roller.
– The four M12 x 80 Allen screws (ROPA item no. 415051) (15), with which the
polyamide couplings (12) are screwed into the rollers, must be coated with special
thread-locking compound and must be used only once.