Operation
Water spray system (option)
252 / 476
6.14.2.3 Water-saving operation (timer control)
The system only sprays if the machine drive is switched on.
Touch the switch panel (11) to activate timer control.
For the best possible control of wetting and to save water at the same time, the spray
times for the 4-set pinch rollers (16) and recleaning (17) can be set separately. Tap the
end of the indicator bar and move it up or down.
– top, continuous operation
– move down to reduce the operating time of the spray interval. One interval is 10
seconds.
A setting of 50% means that the system will spray for 5 seconds and will then stop for
5 seconds.
Wassersprühanlage
11
16
17
To Next Page
Loading...
