Operation
Diesel engine
145 / 476
Operating mode "Turtle"
Engine speed control is manually performed by moving the X-Y key (16) forward/back-
ward on the left joystick.
Press shortly the X-Y key (16): The engine rotational speed increases with each press
by 25 rpm.
Briefly pull backward the X-Y key (16): The engine rotational speed decreases by 25
rpm with each press.
Press and hold pressed the X-Y key (16) forward/backward: The engine rotational
speed will continue to change for as long as you keep the key pressed.
16
Machine drive On/Off
After switching on the machine drive, the speed of the diesel engine is automatically
set to the value which had been set before last switching off the machine drive. After
switching off of the machine drive, the engine speed is automatically reduced to idling
speed (exception "After-loading" see page 236).
To Next Page
Loading...
