Operation
Folding the machine out/in
210 / 476
– Switching off oscillating axle support
– Inserting the safety chains and securing the pickup There is one safety chain
for the right side and one safety chain for the left side of the front chassis. When
driving on public roads, these chains must be fastened to the pickup central part.
Fasten the chains on the central part of the pickup, when you have swung in the
pickup and are leaving the machine. In case of a malfunction of the hydraulic sys-
tem, the pickup then cannot unexpectedly come down. Otherwise, severe damage
to the cab will be the consequence! Such damage is excluded from any guarantee,
warranty or accommodation.
– Switch into the operating mode "Rabbit". The warning signs are automatically
swung down and the ladder is swung into the vehicle contour.
– The additional axles are to be activated as soon as the vehicle is located on a
paved road.
To Next Page
Loading...
