Operation
Loading operation
220 / 476
The feed speed of the drive train also influences the degree of cleaning:
– Low feed speed = thin beet cover on the rollers = all beets pass through a double
cleaning path = greater cleaning effect.
– High feed speed = a thick beet cover on the rollers = only some of the beets pass
through the double cleaning path = lower cleaning effect and a gentler treatment of
the beets.
Optimal distribution of beets across the entire width of the pickup.
We strongly recommend that the frost breakers are never removed from the pickup
side sections. These serve as valuable aids for monitoring the correct feeding quan-
tity. As long as the beets do not jam on the frost breakers, then a blockage of the beet
flow is virtually impossible. You regulate the supply of beets via the feed speed of the
traction drive.
A uniform beet flow at a reasonable throughput without any beet jams and with a high
degree of cleaning
To Next Page
Loading...
