DMG 3200/3100/3000 – User Manual
Page 248 (306)
Manual EIT Source PID
By default, all PID 18 information is automatically sent to the EPG processing card. If EPG
information for certain inputs is not on PID 18, it is possible to manually set the PID value using
the Manual EIT Source PID box.
Figure 9.7 - Manually adding an EIT Source PID
Design of the EPG behavior is based on the ETSI EN 300 458 V1.9.1 (2009-03)
standard along with ETSI TR 101 211 V1.9.1 (2009-06) guideline.
To Next Page
Loading...