Sencore DMG 3200 - Page 82

DMG 3200/3100/3000 – User Manual
Page 82 (306)
Figure–5.37 IP Input Seamless module Status Parameter detailed view.
Additional status parameters for IP Input seamless module:
Seamless Relative delay
Seamless relative delay in ms will be displayed.
Active source
Source IP address
Input Bitrate
Source Input Bitrate in Mbps.
Sequence Protocol
Seamless protocol in use, either RTP or UDP.
Sequence Errors
Source sequence errors since last reset
Port Status
Either Master or Slave depending on which is the main port