RM0440 Rev 4 1441/2126
RM0440 General-purpose timers (TIM15/TIM16/TIM17)
1445
Bit 7 BKCMP7E: tim_brk_cmp7 enable
This bit enables the tim_brk_cmp7 for the timer’s tim_brk input. tim_brk_cmp7 output is
‘ORed’ with the other tim_brk sources.
0: tim_brk_cmp7 input disabled
1: tim_brk_cmp7 input enabled
Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits
in TIMx_BDTR register).
Bit 6 BKCMP6E: tim_brk_cmp6 enable
This bit enables the tim_brk_cmp6 for the timer’s tim_brk input. tim_brk_cmp6 output is
‘ORed’ with the other tim_brk sources.
0: tim_brk_cmp6 input disabled
1: tim_brk_cmp6 input enabled
Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits
in TIMx_BDTR register).
Bit 5 BKCMP5E: tim_brk_cmp5 enable
This bit enables the tim_brk_cmp5 for the timer’s tim_brk input. tim_brk_cmp5 output is
‘ORed’ with the other tim_brk sources.
0: tim_brk_cmp5 input disabled
1: tim_brk_cmp5 input enabled
Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits
in TIMx_BDTR register).
Bit 4 BKCMP4E: tim_brk_cmp4 enable
This bit enables the tim_brk_cmp4 for the timer’s tim_brk input. tim_brk_cmp4 output is
‘ORed’ with the other tim_brk sources.
0: tim_brk_cmp4 input disabled
1: tim_brk_cmp4 input enabled
Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits
in TIMx_BDTR register).
Bit 3 BKCMP3E: tim_brk_cmp3 enable
This bit enables the tim_brk_cmp3 for the timer’s tim_brk input. tim_brk_cmp3 output is
‘ORed’ with the other tim_brk sources.
0: tim_brk_cmp3 input disabled
1: tim_brk_cmp3 input enabled
Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits
in TIMx_BDTR register).
Bit 2 BKCMP2E: tim_brk_cmp2 enable
This bit enables the tim_brk_cmp2 for the timer’s tim_brk input. tim_brk_cmp2 output is
‘ORed’ with the other tim_brk sources.
0: tim_brk_cmp2 input disabled
1: tim_brk_cmp2 input enabled
Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits
in TIMx_BDTR register).
Bit 1 BKCMP1E: tim_brk_cmp1 enable
This bit enables the tim_brk_cmp1 for the timer’s tim_brk input. tim_brk_cmp1 output is
‘ORed’ with the other tim_brk sources.
0: tim_brk_cmp1 input disabled
1: tim_brk_cmp1 input enabled
Note: This bit can not be modified as long as LOCK level 1 has been programmed (LOCK bits
in TIMx_BDTR register).
To Next Page
Loading...
