Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 113
Chapter 3
TimeProvider 2300/2700 CLI Command Set
TP2700> set output e1 ssmbit t1e1 6
Example 4:
To provision the frame type of the T1 output signal that might apply to T1/E1 port as
D4:
TP2700> set output t1 frametype t1e1 d4
Level : Config and Admin

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English