Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 125
Chapter 3
TimeProvider 2300/2700 CLI Command Set
Response 3b:
ETH2 PTP MASTER ACTIVE-PROFILE: itu-g8265-1
Response 3c:
ETH2 PTP MASTER ACTIVE-PROFILE: default
Example 4
 :
To show the PTP client active-profile:
TP2700>show ptp client active-profile eth1
Response 4:
ETH1 PTP CLIENT ACTIVE-PROFILE: telecom-2008
Example 5
 :
To show the Telecom-2008 configuration info for PTP master on ETH2 port:
TP2700>show ptp master config eth2 telecom-2008
Response 5:
EHT2 PTP MASTER CONFIGURATION WITH PROFILE TELECOM-2008:
PTP State : enable
PTP TTL : 64
PTP DSCP : 0
PTP Dither : disable
PTP Max Number Clients : 256
PTP Two Steps : disable
PTP Unicast Negotiation : enable
PTP Unicast Lease Duration : 300
PTP Sync Limit : -7
PTP Announce Limit : -4
PTP Delay Limit : -7
PTP Clock Id : 00:b0:ae:ff:fe:03:46:05
PTP Priority 1 : 128
PTP Priority 2 : 128
PTP Domain : 0
PTP Timescale : auto
Example 6
 :
To show the profile ITU-G.8265-1 configuration info for PTP master on ETH2 port:

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English