Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 131
Chapter 3
TimeProvider 2300/2700 CLI Command Set
Response 12:
ETH1 PTP client port transport type : Ethernet
Example 13:
To display the configuration of the service tier for PTP client on ETH1 port:
TP2700> show ptp client config eth1 service-tier
Response 13:
ETH1 PTP client port service-tier : sync-mask
Example 14:
To display the asymmetry state for PTP client port:
TP2700> show ptp client config eth1 asymmetry state
Response 14:
ETH1 PTP client port asymmetry state : disable
Example 15:
To display the asymmetry information for PTP client port:
TP2700> show ptp client eth1 asymmetry
Response 15:
ETH1 PTP client port asymmetry information:
Current table : Table 1
Current path calibration noise (ns) : 451
Table 1 Clock ID : 00-B0-AE-FF-FE-01-D8-86
Table 1 Path rearrangements per day : 4
Table 1 Number of total paths : 3
Table 2 Clock ID : 00-B0-AE-FF-FE-01-D8-45
Table 2 Path rearrangements per day : 4
Table 2 Number of total paths : 23

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English