150 TimeProvider 2300/2700 User’s Guide 098-00564-000 Revision A3 – July, 2013
Chapter 3
TimeProvider 2300/2700 CLI Command Set
TP2700>set ptp client config eth1 telecom-2008 ttl 10
TP2700>set ptp client config eth1 telecom-2008 dscp 8
TP2700>set ptp client config eth1 telecom-2008 unicast-negotiation
enable
TP2700>set ptp client config eth1 telecom-2008 lease-duration 300
TP2700>set ptp client config eth1 telecom-2008 announce-interval -4
TP2700>set ptp client config eth1 telecom-2008 announce-receipt-timeout
5
TP2700>set ptp client config eth1 telecom-2008 sync-interval -7
TP2700>set ptp client config eth1 telecom-2008 delay-req-interval -7
TP2700>set ptp client config eth1 telecom-2008 domain 5
Example 9:
To add masters to the PTP master table for PTP client in eth1 port:
TP2700>set ptp client config eth1 telecom-2008 master-table add index 1
address 192.168.1.11
TP2700>set ptp client config eth1 telecom-2008 master-table add index 2
address 192.168.5.11
Example 10:
To delete a master from the PTP master table for PTP client in eth1 port:
TP2700>set ptp client config eth1 telecom-2008 master-table delete
index 2
Example 11:
To delete all masters from the PTP master table for PTP client in eth1 port:
TP2700>set ptp client config eth1 telecom-2008 master-table clear
Level : Config and Admin
To Next Page
Loading...
Need help?
General