Symmetricom TimeProvider 2700 User Manual

276 TimeProvider 2300/2700 User’s Guide 098-00564-000 Revision A3 – July, 2013
Appendix A System Messages
System Notification Messages
Entered
time/frequency
fast-track state
003 Event No Entered time/frequency
fast-track state
Transitioned out of
fast-track state
No action required
No action required
Entered
time/frequency
normal-track state
004 Event No Entered time/frequency
normal-track state
Transitioned out of
normal-track state
No action required
No action required
Entered
time/frequency
bridging state
005 Event No Entered time/frequency
bridging state
Transitioned out of
bridging state
No action required
No action required
Entered
time/frequency
holdover state
006 Minor No Entered time/frequency
holdover state
Transitioned out of
holdover state
 Check input
references
 Check configuration
for correct reference
selection
 Check reference
status
 Check ref
configuration for
Priority and PQL
values. See
Show
REF
command.
No action required
Entered
time/frequency
holdover recovery
state
008 Minor No Entered time/frequency
holdover recovery state
Transitioned out of
holdover recovery state
No action required
No action required
Table A-1. System Notification Messages (Continued)
Description
Event
ID
Msg
Level
Trans-
itory
MsgText Corrective Action

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English