Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 277
Appendix A System Messages
System Notification Messages
GNSS/SYNCE/PTP
/T1E1 Input Poor
Quality
021 Minor No GNSS/SYNCE/PTP/T1E1
Input Poor Quality
Input poor quality cleared
 If this persists for
> 1hr check input
reference.
 For GNSS check
signal quality.
 For PTP check PTP
input Status
 For T1/E1 check T1
or E1 status
No action required
GNSS/PTP input
time qualified
022 Event No GNSS/PTP input time
qualified
Exit Input Time qualified
cleared
No action required
No action required
GNSS/SYNCE/PTP
/T1E1 input
frequency qualified
023 Event No GNSS/SYNCE/PTP/T1E1
input frequency qualified
Input frequency qualified
No action required
No action required
GNSS/PTP input
selected as time
reference
024 Event Yes GNSS/PTP input selected
as time reference
n/a
No action required
n/a
GNSS/SYNCE/PTP
/T1E1 input
selected as
frequency reference
025 Event Yes GNSS/SYNCE/PTP/T1E1
input selected as
frequency reference
n/a
No action required
n/a
Table A-1. System Notification Messages (Continued)
Description
Event
ID
Msg
Level
Trans-
itory
MsgText Corrective Action

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English