Symmetricom TimeProvider 2700 User Manual

284 TimeProvider 2300/2700 User’s Guide 098-00564-000 Revision A3 – July, 2013
Appendix A System Messages
System Notification Messages
Operational Failure: 132 Critical No Operational failure: 1PPS
interrupt. GNSS upgrade
failure after the 1PPS
interrupt.
Operational failure
cleared
 If alarm persists
power cycle/reboot
 Call SGS support if it
persists after
reboot/power cycle.
No action required
Battery(-48V)-A
failure
133 Major No Battery(-48V)-A failure
Battery(-48V)-A failure
cleared
Check power
connections and external
DC supply that is
supplying DC power to
your unit
No action required
Battery(-48V)-B
failure
134 Major No Battery(-48V)-B failure
Battery(-48V)-B failure
cleared
Check power
connections and external
DC supply that is
supplying DC power to
your unit
No action required
FPGA failure 135 Critical n/a FPGA failure
FPGA failure cleared
 If alarm persists
power cycle/reboot
 Call SGS support if it
persists after
reboot/power cycle.
No action required
Flash partition
failure
136 Critical No Flash partition failure
Flash partition failure
cleared
Not supported at this time
No action required
Table A-1. System Notification Messages (Continued)
Description
Event
ID
Msg
Level
Trans-
itory
MsgText Corrective Action

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English