TOMATECH TAC-100XT User Manual

TOMATECH AUTOMATION
● Thread cutting decelerates to stop when the system resets, emergently stops or its
driver alarms.
Command path: relative position between thread cutting end point and starting point with
U, W, R and tool path and thread run-out direction with different U, W, R signs below:
Fig.3-46
Example：Fig.3-47
Fig.3-47
Program:
O0012;
M3 S300 G0 X150 Z50 T0101; (Thread tool)
G0 X65 Z5; (Rapid traverse)

TOMATECH TAC-100XT Specifications

General

Brand	TOMATECH
Model	TAC-100XT
Category	Control Systems
Language	English