TOMATECH AUTOMATION
range.
(2) The share variable (#100~#199, #500~#999) values are displayed in the macro
variable
window, and is also displayed the window, the data is input directly to value the share
variable.
(3) The local variable (#1~#33) and the system variable values are not displayed. Some
local variable or system variable value is displayed by assigned with the share variable.
� System variable
1）Input signal: #1000 --- #1047 (Read PMC input signal)
2）Output signal #1100 --- #1147 (output to PMC signal)
3）X length compensation #1500 --- #1531 (radius ,can read/write)
4）Z length compensation #1600 --- #1631 (can read/write)
5）Y length compensation #1700 --- #1731 (can read/write)
6）Radius compensation #1800 --- #1831 (can read/write)
7）X wear compensation #1900 --- #1931 (radius ,can read/write)
8）Z wear compensation #2000 --- #2031 (can read/write)
9）Y wear compensation #2100 --- #2131 (can read/write)
10）Radius wear compensation #2200 --- #2231 (can read/write)
11）Alarm #3000
12）User data list table #3500 --- #3755 (read only)
13）Modal info.#4000 --- #4030 (read only)
14）position info #5001 --- #5030 (read only)
（1）Interface signal: CNC only executes G and F signals. Whether there are I/O to
correspond to it is defined by PLC.
Variable No. Function
(2) Tool compensation system variable:
(3) Machined workpiece number:
#3901 Machined workpiece number(completion)
To Next Page
Loading...