TOMATECH AUTOMATION
Programming is a course of workpiece contours, machining technologies, technology
parameters and tool parameters being edit into part programs according to special CNC
programming G codes. CNC machining is a course of CNC controlling a machine tool to
complete machining of workpiece according requirements of part programs.
Technical flow of CNC machining is as following Fig. 1-2.
Fig. 1-2
O0001；
G00 X3.76 Z0；
G01 Z-1.28 F50；
…
M30；
％
Analyse workpiece drawings and confirm
machining processing
Edit part programs and record into CNC
Test part programs and execute trial run
Check part dimension and modify part
programs and compensations
Execute toolsetting and set tool offsets and
coordinates
To Next Page
Loading...
Need help?
General