TOMATECH AUTOMATION
Inch machine 0.0001 inch 0.00001 inch
［Data range］
IS-B IS-C
Metric machine 0～1000 0～10000
Inch machine 0～50 0～500
1 6 2 CSACCFL
［Data type］ Word spindle
［Data meaning］ initial speed of CS acceleration/deceleration
［Data unit］ deg/min
［Data range］ 0～4000
1 6 3 CSACCTIME
［Data type］ Word spindle
［Data meaning］ acceleration/deceleration time constant of CS
［Data unit］ ms
［Data range］ 0～4000
1 6 6 CAACCFL
［Data type］ Word spindle
［Data meaning］ initial speed of linear acceleration/deceleration in rigid tapping
［Data unit］
Setting unit Data unit
Metric machine mm/min
Inch machine 0.1inch/min
［Data range］ 0～4000
1 6 7 CAACCTIME
［Data meaning］ linear acceleration/deceleration time constant in rigid tapping tool
in-feed
［Data unit］ ms
［Data range］ 0～4000
Chapter 3 Parameters
391
Volume Ⅲ Connection
1 6 9 RTAPBACKRATE
［Data meaning］ override value in rigid tapping tool retraction (override is 100% when it
is set to
0)
［Data unit］ ％
［Data range］ 0～200
1 7 0 CMCODE
［Data meaning］ M code used for spindle clamping during rigid tapping
［Data unit］
［Data range］ 3～97
1 7 1 CAMAX_S
［Data meaning］ max. spindle speed in rigid tapping
［Data unit］ r/min
To Next Page