TOMATECH AUTOMATION
［Data range］ 0～6000
2 1 6 ROT_REVn
［Data type］ Word axis
［Data meaning］ movement pre rev when the additional axis is rotary
［Data unit］
Setting unit IS-B IS-C
Rotary axis 0.001 deg 0.0001 deg
［Data range］ 1000～99999999
2 1 9 PLCDIDOn
［Data type］ Word axis
［Data meaning］ Select DI/DO according to PLC controlled axes (0 means PLC axis
control is
not applied)
［Data unit］
［Data range］ 0～4
2 2 4 AXISNUM
［Data meaning］ Axis number displayed on the screen
［Data unit］
［Data range］ 2～5
2 2 5 NAME_n
［Data type］ Word axis
［Data meaning］ Axis name definition of each axis
［Data range］ 65, 66, 67, 88, 89, 90
Axis name Setting value Axis name Setting value Axis name Setting value
X 88 A 65 C 67
392
Volume Ⅲ Connection
Z 90 B 66 Y 89
2 3 0 ATTRIB_n
［Data meaning］ ATTRIB_n is the additional attribution setting
［Data range］ 0~7
Setting value Meaning
0 It is neither the three basic axes and an axis parallel to them
1 X axis of the three basic axes
2 Y axis of the three basic axes
3 Z axis of the three basic axes
5 An axis parallel to X
6 An axis parallel to Y
7 An axis parallel to Z
2 3 5 POLARLINEAXIS
［Data meaning］ Linear axis setting of the polar coordinate interpolation
［Data range］ 0~4
Setting value Meaning
To Next Page
Loading...
Need help?
General