Multi Pro 5800Page 6 − 32Electrical System
General Operation Problems
Problem Possible Causes
Battery does not charge. Wiring to the charging circuit components is loose,
corroded or damaged (see Chapter 11 − Foldout
Drawings).
Alternator belt is slipping or damaged.
Alternator is faulty.
Battery is faulty.
Engine stops during operation. Ignition switch or circuit wiring is faulty.
Engine oil pressure drops below 7 PSI (0.5 kg/cm
2
)
Fuel run/stop solenoid or circuit wiring is faulty (Diesel
engine only).
Engine coolant temperature exceeds 240F (116C)
(Gasoline engine only)
Engine intake air temperature exceeds 190F (88C)
(Gasoline engine only)
Speed lock coil does not hold. Brake pedal switch or circuit wiring is faulty.
Speed lock circuit diodes (D1 & D2) are faulty.
To Next Page
Loading...
Need help?
General
