Multi Pro 5800 Page 7 − 3 ExcelaRate Spray System
General Information
User Manuals
A variety or User Manuals are available for Multi Pro ma-
chines with ExcelaRate spray systems. The Operator’s
Manual, Software Guide, Installation Instructions and
Parts Catalogs provide information regarding the instal-
lation, operation, general maintenance and mainte-
nance intervals for your Multi Pro machine. Refer to
these publications for additional information when ser-
vicing the machine.
Precautions Concerning Chemicals Used in Spray System
Chemicals can injure persons, animals, plants, soil or
other property. To reduce the risk of environmental dam-
age and personal injury:
1. Select the proper chemical for the job.
2. Carefully read the directions printed on the chemical
manufacturer’s labels before handling chemicals. In-
structions on chemical manufacturer’s container labels
regarding mixing proportions should be read and strictly
followed.
3. Keep spray material away from skin. If spray material
comes in contact with a person, wash it off immediately
in accordance with manufacturer’s recommendations
(container labels and Material Safety Data Sheets).
4. Always wear protective clothing, chemical resistant
gloves, eye protection and other personal protective
equipment as recommended by the chemical manufac-
turer.
5. Properly dispose of chemical containers, unused
chemicals and chemical solution.
Precautions for Removing or Adjusting Spray System Components
1. Stop the vehicle and set the parking brake.
2. Shut off the vehicle’s engine and remove the key
from the ignition switch.
3. Disengage all power and wait until all moving parts
have stopped.
4. Remove chemicals from pump, hoses and other
spray components. Thoroughly neutralize and rinse
spray system before loosening or removing any spray
system component(s).
5. Make sure line pressure is relieved before loosening
any system component (e.g. spray valves, spray system
hose).
ExcelaRate
Spray System