Multi Pro 5800 Page 8 − 57 GeoLink Spray System
The AGI−4 antenna, X25 or X30 control console and
ASC−10 auto section controller communicate with each
other on a CAN−bus network. The GeoLink Can−bus
network is separate from the sprayer traction unit CAN−
bus.
NOTE: The ASC−10, the X25 or X30 control console,
the GPS antenna assembly (including the modem and
the IMU for machines with RTK correction) are pro-
grammed specifically for each sprayer. If any of these
components require replacement for any reason, con-
tact the National Service Network (NSN) or your Toro
Distributor. The replacement components provided
should arrive pre−programmed for the specific sprayer.
IMPORTANT: The console should be removed from
the sprayer when not in use to protected it from ex-
treme temperatures, damage and theft.
GeoLink
Spray System
To Next Page
Loading...
