Yealink T40G Administrator's Guide

Phone Provisioning
85
Permitted
Values
String within 32 characters
Default
For T54S IP phones: T54S.
For T52S IP phones: T52S.
For T48G IP phones: T48G.
For T48S IP phones: T48S.
For T46G IP phones: T46G.
For T46S IP phones: T46S.
For T42G IP phones: T42G.
For T42S IP phones: T42S.
For T41P IP phones: T41P.
For T41S IP phones: T41S.
For T40P IP phones: T40P.
For T40G IP phones: T40G.
For T29G IP phones: T29G.
For T27P IP phones: T27P.
For T27G IP phones: T27G.
For T23P IP phones: T23P.
For T23G IP phones: T23G.
For T21(P) E2 IP phones: T21P_E2.
For T19(P) E2 IP phones: T19P_E2.
Static Provision Configuration
To use the static provision method, you need to obtain the provisioning server address first when
configuring a provisioning server.
The provisioning server address can be IP address, domain name or URL. If a user name and password are
specified as part of the provisioning server address, for example, http://user:pwd@server/dir, they will be
used only if the server supports them.
Note
A URL should contain forward slashes instead of back slashes and should not contain spaces. Escape
characters are not supported.
If a user name and password are not specified as part of the provisioning server address, the User Name and
Password of the provisioning server configured on the phone will be used.
The following table lists the parameters you can use to configure static provision.
Parameter
static.auto_provision.server.url
<y0000000000xx>.cfg
Description
It configures the access URL of the provisioning server.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries