Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
84
DHCP Provision Configuration
You can select to use IPv4 or IPv6 custom DHCP option according to your network environment. The IPv4
or IPv6 custom DHCP option must be in accordance with the one defined in the DHCP server.
The following table lists the parameters you can use to configure DHCP provision.
static.auto_provision.dhcp_option.enable
It triggers the DHCP Active feature to on or off.
0-Off
1-On, the IP phone will obtain the provisioning server address by detecting DHCP
options.
Settings->Auto Provision->DHCP Active
static.auto_provision.dhcp_option.list_user_options
It configures the IPv4 custom DHCP option for requesting provisioning server address.
Multiple options are separated by commas.
Note: It works only if “static.auto_provision.dhcp_option.enable” is set to 1 (On).
Settings->Auto Provision->IPv4 Custom Option
static.auto_provision.dhcp_option.list_user6_options
It configures the IPv6 custom DHCP option for requesting provisioning server address.
Multiple options are separated by commas.
Note: It works only if the value of the parameter
“static.auto_provision.dhcp_option.enable” is set to 1 (On).
Integer from 135 to 65535, except 143
Settings->Auto Provision->IPv6 Custom Option
static.auto_provision.url_wildcard.pn
It configures the characters to replace the wildcard $PN in the received URL of the
provisioning server.
Note: The configured characters must be in accordance with the actual directory
name of the provisioning server.
To Next Page
Loading...
Need help?
General
