Yealink T40G Administrator's Guide

Phone Customization
179
(X=1-4)
Description
It configures the label displayed on the LCD screen for a specific programmable key.
This is an optional configuration.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Dsskey->Programmable Key->Label
Parameter
programablekey.X.extension
[1]
<y0000000000xx>.cfg
Description
For multicast paging:
It configures the channel of multicast paging group.
For intercom feature:
It configures the pickup code.
Note: It is only applicable when “programablekey.X.type” is set to 14 or 24.
Permitted
Values
For multicast paging:
0 to 31
For intercom feature:
String within 256 characters
Default
0
Web UI
Dsskey->Programmable Key->Extension
Parameter
programablekey.X.xml_phonebook
[1]
<y0000000000xx>.cfg
Description
It specifies a specific group/phone book when multiple groups/phone books are
configured on the IP phone.
For, example, Remote Phone Book 1 “Sell” and Remote Phone Book 2 “Market” are
configured on the phone, you can configure “programablekey.X.xml_phonebook = 0”
to specify the Remote Phone Book 1 “Sell” for the specific programmable key. The
user can press this line key to access the Remote Phone Book 1 “Sell”.
Note: It is only applicable when “programablekey.X.type” is set to 22 or 45.
Permitted
Values
Interger from 0 to 48
Default
0
Web UI
Dsskey->Programmable Key->Line
[1]]
X is the programmable key ID. For T54S/T48S/T48G/T46S/T46G, X=1-10, 12-14, 17-18; for
T52S/T42G/T42S/T41P/T41S/T40P/T40G, X=1-10, 13, 17-18; for T29G/T27P/T27G, X=1-14, 17-18; for
T23P/T23G/T21(P) E2, X=1-10, 14, 17-18; for T19(P) E2, X=1-9, 13, 14, 17-18.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries