Yealink T40G Administrator's Guide

Call Features
281
of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Permitted
Values
String within 16 characters
Default
Blank
Web UI
Settings->Dial Plan->Area Code->Code
Parameter
dialplan.area_code.min_len
<y0000000000xx>.cfg
Description
It configures the minimum length of the entered number.
Note: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Permitted
Values
Integer from 1 to 15
Default
1
Web UI
Settings->Dial Plan->Area Code->Min Length (1-15)
Parameter
dialplan.area_code.max_len
<y0000000000xx>.cfg
Description
It configures the maximum length of the entered number.
Note: The value must be larger than the minimum length. It works only if the values of
the parameters “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable”
are set to 0 (Disabled).
Permitted
Values
Integer from 1 to 15
Default
15
Web UI
Settings->Dial Plan->Area Code->Max Length (1-15)
Parameter
dialplan.area_code.line_id
<y0000000000xx>.cfg
Description
It configures the desired line to apply the area code rule. The digit 0 stands for all
lines. If it is left blank, the area code rule will apply to all lines on the IP phone.
Note: Multiple line IDs are separated by commas. It works only if the values of the
parameters “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are
set to 0 (Disabled). It is not applicable to T19(P) E2 IP phones.
Permitted
Values
0 to 16 (for T54S/T48S/T48G/T46S/T46G/T29G)
0 to 12 (for T52S/T42G/T42S)
0 to 6 (for T41P/T41S/T27P/T27G)
0 to 3 (for T40P/T40G/T23P/T23G)
0 to 2 (for T21(P) E2)
Default
Blank

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries