Yealink T40G

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
322
Values
Default
Blank
Web UI
Features->Forward&DND->DND->Off Code
Phone UI
Menu->Features->DND->Off Code
DND in Custom Mode Configuration
The following table lists the parameters you can use to configure DND in Custom mode.
Parameter
account.X.dnd.enable
[1]
<MAC>.cfg
Description
It triggers the DND feature to on or off.
Note: It works only if “features.dnd.allow” is set to 1 (Enabled) and value of the
parameter “features.dnd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
0-Off
1-On, the IP phone will reject incoming calls on account X.
Default
0
Web UI
Features->Forward& DND->DND->AccountX->DND Status
Phone UI
Menu->Features->DND->AccountX->DND Status
Parameter
account.X.dnd.on_code
[1]
<MAC>.cfg
Description
It configures the DND on code to activate the server-side DND feature.
The IP phone will send the DND on code to the server when you activate DND feature
on the IP phone.
Example:
account.1.dnd.on_code = *73
Note: It works only if the values of the parameters “features.dnd.allow”,
“features.dnd_mode” and “account.X.dnd.enable” are both set to 1. It is not applicable
to T19(P) E2 IP phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward& DND->DND->AccountX->On Code
Phone UI
Menu->Features->DND->AccountX->On Code
Parameter
account.X.dnd.off_code
[1]
<MAC>.cfg
Description
It configures the DND off code to deactivate the server-side DND feature.
The IP phone will send the DND off code to the server when you deactivate DND