Yealink T40G

Audio Features
391
Description
It configures the normal delay time (in milliseconds) of jitter buffer in the wired
network.
Note: It works only if “voice.jib.adaptive” is set to 0 (Fixed). The value of this parameter
should be greater than “voice.jib.min” and less than “voice.jib.max”.
Permitted
Values
Integer from 0 to 400
Default
120
Web UI
Settings->Voice->JITTER BUFFER->Normal
Parameter
voice.jib.wifi.adaptive
<y0000000000xx>.cfg
Description
It configures the type of jitter buffer in the wireless network.
Note: It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
Values
0-Fixed
1-Adaptive
Default
1
Parameter
voice.jib.wifi.min
<y0000000000xx>.cfg
Description
It configures the minimum delay time (in milliseconds) of jitter buffer in the wireless
network.
Note: It works only if “voice.jib.wifi.adaptive” is set to 1 (Adaptive). The value of the
minimum delay time should be less than or equal to that of the normal delay time
(configured by the parameter “voice.jib.wifi.normal”). The value of this parameter
should be less than the values of the parameters “voice.jib.wifi.normal” and
“voice.jib.wifi.max”. It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
Values
Integer from 0 to 500
Default
60
Parameter
voice.jib.wifi.max
<y0000000000xx>.cfg
Description
It configures the maximum delay time (in milliseconds) of jitter buffer in the wireless
network.
Note: It works only if “voice.jib.wifi.adaptive” is set to 1 (Adaptive). The value of this
parameter should be greater than the values of the parameters “voice.jib.wifi.normal”
and “voice.jib.wifi.min”. It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
Values
Integer from 0 to 500