Yealink T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
434
Topics
Directed Call Pickup Configuration
Dialog Info Call Pickup
Directed Call Pickup Configuration
You can enable directed call pickup, the LCD screen will display a DPickup soft key when picking up the
handset, pressing the Speakerphone key or pressing the line key (You may need to press the More soft
key to see the DPickup soft key). As shown below:
You can configure a directed call pickup code and pick up the incoming call using the DPickup soft key.
Tip
You can set a DSS key as a Directed Pickup key, and specify a contact you want to pick up a call from for this
key. For more information, refer to DSS Keys.
The following table lists the parameters you can use to configure directed call pickup.
Parameter
features.pickup.direct_pickup_enable
<y0000000000xx>.cfg
Description
It enables or disables the user to use DPickup soft key when performing directed call
pickup feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the DPickup soft key on the Dialing screen.
Default
0
Web UI
Features->Pick up & Park->Directed Call Pickup
Parameter
features.pickup.direct_pickup_code
<y0000000000xx>.cfg
Description
It configures the directed call pickup code on a phone basis.
Note: The directed call pickup code configured on a per-line basis
(“account.X.direct_pickup_code”) takes precedence over that configured on a phone
basis (“features.pickup.direct_pickup_code”).
Permitted
Values
String within 32 characters

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries