Phone Network
27
It enables or disables the Wi-Fi feature.
Note: It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
static.network.redundancy.mode
[1]
It configures the network connection mode to be used preferentially.
Note: It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
0-If Wi-Fi mode is activated, the wired network is unavailable; Wi-Fi mode must be
deactivated if you want to use the wired network.
1-Use wireless network preferentially.
2-Use wired network preferentially.
static.network.redundancy.failback.timeout
[1]
It configures the time to wait (minutes) for the IP phone to switch to the preferred
network (configured by “static.network.redundancy.mode”).
Note: It works only if “static.network.redundancy.mode” is set to 1 or 2. It is only
applicable to T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Integer from 0 to 1440
0-The phone will not switch as long as the current network is available.
1 to 1440–The phone will keep using the current network for the specified time after
the preferentially used network becomes available. If the preferentially used network
is still available after the specified time, the phone performs a network switch while
the phone is not in use.
It activates or deactivates the Wi-Fi mode.
Note: It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones. It works only if
“static.wifi.function.enable” is set to 1 (Enabled).
To Next Page
Loading...
Need help?
General
