Yealink T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
28
Web UI
Network->Wi-Fi->Wi-Fi Active
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi
T42S/T41S/T27G:
Menu->Settings->Basic Settings->Wi-Fi
Parameter
static.wifi.X.label
[2]
<y0000000000xx>.cfg
Description
It configures the profile name of the wireless network X for the IP phone.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Network->Wi-Fi->Profile Name
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network (press Add)->Profile Name
or
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network->Option->Edit->Profile Name
T42S/T41S/T27G:
Menu->Settings->Basic Settings->Wi-Fi (On)->Known Network (press Add)->Profile
Name
or
Menu->Settings->Basic Settings->Wi-Fi->Wi-Fi (On)->Known
Network->Option->Edit->Profile Name
Parameter
static.wifi.X.ssid
[2]
<y0000000000xx>.cfg
Description
It configures the Service Set Identifier (SSID) of the wireless network X.
SSID is a unique identifier for accessing wireless access points.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Network->Wi-Fi->SSID
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network (press Add)->SSID
or

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries