Yealink T40G Administrator's Guide

Troubleshooting
564
Description
It enables or disables the IP phone to upload log messages to the syslog server in real
time.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings->Configuration->Enable Syslog Feature
Parameter
static.syslog.server
<y0000000000xx>.cfg
Description
It configures the IP address or domain name of the syslog server when exporting log
to the syslog server.
Example:
static.syslog.server = 192.168.1.100
Permitted
Values
IP address or domain name
Default
Blank
Web UI
Settings->Configuration->Syslog->Syslog Server
Parameter
static.syslog.server_port
<y0000000000xx>.cfg
Description
It configures the port of the syslog server.
Example:
static.syslog.port = 515
Permitted
Values
Integer from 1 to 65535
Default
514
Web UI
Settings->Configuration->Syslog->Syslog Server->Port
Parameter
static.syslog.transport_type
<y0000000000xx>.cfg
Description
It configures the transport protocol that the IP phone uses when uploading log
messages to the syslog server.
Permitted
Values
0-UDP
1-TCP
2-TLS
Default
0
Web UI
Settings->Configuration->Transport Type
Parameter
static.syslog.level
<y0000000000xx>.cfg
Description
It configures the lowest level of syslog information that displays in the syslog.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries